Sodium Acetate Trihydrate Anhydrous Powder BP IP USP ACS AR Analytical Reagent FCC Food Grade Crystals Granules Tablets Manufacturers Exporters |
| Aadhunik Industries is a manufacturing group company. Aadhunik Industries is pioneer manufacturer and exporter of Sodium Acetate Trihydrate Anhydrous Powder, Specialty Chemicals, Pharmaceutical Excipients, Food Fragrance & Flavor chemicals in India. It has toll manufacturers and representatives in UAE, Europe, Canada & USA and agents & customers in all countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Korea, Japan, Russia etc. |
| Aadhunik Industries and/or associated units are FDA-GMP certified, Halal and/or Kosher certified, REACH registered, ISO-9001, ISO-22000 HACCP certified. We offer crystals granules in precise micron or mesh size as per buyers needs. We offer very high purity standards as per specifications required. |
---------- 
---------- 
Translate
MSDS of Sodium Acetate Anhydrous Manufacturers
Specifications of Sodium Acetate Trihydrate Crystals Technical Grade: Show/Hide Details
Assay: 98% Sodium Acetate Trihydrate minimum
Appearance: Off-White Crystalline
Test Solution: A 10% Solution is clear & colourless
pH: 7.5-9
Arsenic: Less than 1 ppm
Calcium & Magnesium: Less than 100 ppm
Heavy Metals: Less than 10 ppm
Iron: Less than 10 ppm
Chlorides: Less than 0.5%
Sulphates: Less than 0.5%
Packing: 25-50 kg in HMHDP liners placed in an HDPE bag or drum or in Jumbo bags or as required by the buyer.
Specifications of Sodium Acetate Trihydrate Crystals Pure Grade: Show/Hide Details
Assay: 99% Sodium Acetate Trihydrate minimum
Appearance: White Transparent Crystalline
Test Solution: A 10% Solution is clear & colourless
pH: 7.5-9
Arsenic: Less than 1 ppm
Calcium & Magnesium: Less than 50 ppm
Heavy Metals: Less than 1 ppm
Iron: Less than 5ppm
Chlorides: Less than 0.03%
Sulphates: Less than 0.02%
Specifications of Sodium Acetate Anhydrous Powder Technical Grade: Show/Hide Details
Purity: 98.5% minimum purity as CH3COONa
Appearance: White to Off-White Powder
Clarity of 10% Solution: A 10% Solution w/v is clear
pH (10% in water): pH between 7.5-9
Arsenic: Arsenic < 1ppm.
Calcium and Magnesium: To pass the test 100 ppm
Heavy Metals: < 10ppm
Iron: < 10ppm
Chloride: <0.5%
Sulphate: <0.5%
Specifications of Sodium Acetate Anhydrous Powder Pure Grade: Show/Hide Details
Purity: 99 % minimum purity as CH3COONa
Appearance: Snow-White Powder
Clarity of 10% Solution: A 10% Solution w/v is clear and colourless
pH (10% in water): pH between 7.5-9
Arsenic: Arsenic < 1ppm.
Calcium and Magnesium: To pass the test 50 ppm
Heavy Metals: < 1ppm
Iron: < 5ppm
Chloride: < 100ppm
Sulphate: < 20ppm.
Specifications of Sodium Acetate IP Grade: Show/Hide Details
Dry Basis Assay: 99 to 101%
Characteristics: Colourless Crystals
Solubility: Soluble in 0.8 part of water and in 19 parts of Ethanol (96%)
Clarity and colour of 10% w/v solution: Clear and Colourless
Alkalinity (pH of 5% solution): 7.5-9.0
Arsenic: 2 ppm
Calcium and Magnesium (calculated as Ca): 50 ppm
Heavy Metals as Lead: 10 ppm
Iron: 10 ppm
Chloride: 200 ppm
Sulphate:200 ppm
Reducing Substances: Passes test
Specifications of Sodium Acetate USP Grade: Show/Hide Details
Sodium Acetate USP
C2H3NaO2·3H2O 136.08
Assay— Sodium Acetate contains three molecules of water of hydration, or is anhydrous. It contains not less than 99.0 percent and not more than 101.0 percent of C2H3NaO2, calculated on the dried basis.
Packaging and storage— Preserve in tight containers.
Labeling— Label it to indicate whether it is the trihydrate or is anhydrous. Where Sodium Acetate is intended for use in hem dialysis, it is so labeled.
Identification— A solution responds to the test for Sodium and for Acetate.
pH: between 7.5 and 9.2, in a solution in carbon dioxide-free water containing the equivalent of 30 mg of anhydrous sodium acetate per mL.
Loss on drying— Dry at 120 to constant weight: the hydrous form loses between 38.0% and 41.0% of its weight, and the anhydrous form loses not more than 1.0% of its weight.
Insoluble matter— Dissolve the equivalent of 20 g of anhydrous sodium acetate in 150 mL of water, heat to boiling, and digest in a covered beaker on a steam bath for 1 hour. Filter through a tarred filtering crucible, wash thoroughly, and dry at 105 : the weight of the residue does not exceed 10 mg (0.05%).
Chloride— A portion equivalent to 1.0 g of anhydrous sodium acetate shows no more chloride than corresponds to 0.50 mL of 0.020 N hydrochloric acid (0.035%).
Sulfate— A portion equivalent to 10 g of anhydrous sodium acetate shows no more sulfate than corresponds to 0.50 mL of 0.020 N sulfuric acid (0.005%).
Calcium and magnesium— To 20 mL of a solution containing the equivalent of 10 mg of anhydrous sodium acetate per mL add 2 mL each of 6 N ammonium hydroxide, ammonium oxalate TS, and dibasic sodium phosphate TS: no turbidity is produced within 5 minutes.
Potassium— Dissolve the equivalent of 3 g of anhydrous sodium acetate in 5 mL of water, add 1N acetic acid drop wise until the solution is slightly acidic, and then add 5 drops of sodium cobalt nitrite TS: no precipitate is formed.
Aluminum: (where it is labeled as intended for use in hem dialysis)— the limit is 0.2µ =g per g.
Heavy metals—the limit is 0.001%.
Organic volatile impurities: meets the requirements.
Specifications of Sodium Acetate BP Grade: Show/Hide Details
Sodium Acetate BP
C2H3NaO2,3H2O
Action and use
Used in solutions for dialysis; excipient.
DEFINITION
Sodium ethanoate trihydrate.
Content
99.0 per cent to 101.0 per cent (dried substance).
CHARACTERS
Appearance
Colourless crystals.
Solubility
Very soluble in water, soluble in ethanol (96 per cent).
IDENTIFICATION
A. 1 ml of solution S (see Tests) gives reaction (b) of acetates.
B. 1 ml of solution S gives reaction (a) of sodium.
C. Loss on drying (As shown in the Relevant Test).
TESTS
Solution S
Dissolve 10.0 g in carbon dioxide-free water prepared from distilled water R and dilute to 100 ml 100 ml with the same solvent.
Appearance of solution
Solution S is clear and colourless.
pH
7.5 to 9.0.
Dilute 5 ml of solution S to 10 ml with carbon dioxide-free water.
Reducing substances
Dissolve 5.0 g in 50 ml of water, then add 5 ml of dilute sulphuric acid and 0.5 ml of 0.002 M potassium permanganate. The pink colour persists for at least 1 h. Prepare a blank in the same manner but without the substance to be examined.
Chlorides
Maximum 200 ppm.
Sulphates
Maximum 200 ppm.
Aluminium
Maximum 0.2 ppm, if intended for use in the manufacture of dialysis solutions.
Arsenic
Maximum 2 ppm, determined on 0.5 g.
Calcium and magnesium
Maximum 50 ppm, calculated as Ca.
Heavy metals
Maximum 10 ppm.
Iron
Maximum 10 ppm, determined on 10 ml of solution S.
Loss on drying
39.0 per cent to 40.5 per cent, determined on 1.000 g by drying in an oven at 130C.
Specifications of Sodium Acetate FCC Food Grade US Food Chemical Codex Grade: Show/Hide Details
C2H3NaO2 Formula weight, anhydrous 82.03
C2H3NaO2·3H2O Formula weight, trihydrate 136.08
DESCRIPTION
Sodium Acetate occurs as colorless, transparent crystals or as a granular, crystalline or white powder. The anhydrous form is hygroscopic; the trihydrate effloresces in warm, dry air. One gram of the anhydrous form dissolves in about 2 mL of water; 1 g of the trihydrate dissolves in about 0.8 mL of water and in about 19 mL of alcohol.
Function: Buffer.
REQUIREMENTS
Identification: A 1:20 aqueous solution gives positive tests for Sodium and for Acetate.
Assay: Not less than 99.0% and not more than 101.0% of C2H3NaO2 after drying.
Alkalinity Anhydrous: Not more than 0.2%; Trihydrate: Not more than 0.05%.
Lead: Not more than 2 mg/kg.
Loss on Drying: Anhydrous: Not more than 1.0%; Trihydrate: Between 36.0% and 41.0%.
Potassium Compounds: Passes test.
Specifications of Sodium Acetate Anhydrous ACS Grade Analytical Reagent: Show/Hide Details
ACS Reagent Grade
Sodium Acetate Anhydrous
CH3COONa
Formula Wt 82.03
CAS Number 127-09-3
REQUIREMENTS
Assay: 99.0% C2H3O2Na
pH of a 5% solution: 7.0-9.2 at 25C
MAXIMUM ALLOWABLE
Insoluble matter: 0.01%
Loss on drying at 120C: 1.0%
Chloride (Cl): 0.002%
Phosphate (PO4): 0.001%
Sulfate (SO4): 0.003%
Calcium (Ca): 0.005%
Magnesium (Mg): 0.002%
Heavy metals (as Pb): 0.001%
Iron (Fe): 0.001%
Specifications of Sodium Acetate Trihydrate ACS Grade Show/Hide Details
Analytical Reagent:ACS Reagent Grade
NaC2H3O2 . 3H2O
Formula Wt 136.08
CAS Number 6131-90-4
REQUIREMENTS
Assay: 99.0-101% NaC2H3O2-3H2O
pH of a 5% solution: 7.5-9.2 at 25C
Substances reducing permanganate: Passes test
MAXIMUM ALLOWABLE
Insoluble matter: 0.005%
Chloride (Cl): 0.001%
Phosphate (PO4): 5 ppm
Sulfate (SO4): 0.002%
Heavy metals (as Pb): 5 ppm
Iron (Fe): 5 ppm
Calcium (Ca): 0.005%
Magnesium (Mg): 0.002%
Potassium (K): 0.005%
CAS Number 6131-90-4 (Trihydrate) & 127-09-3 (Anhydrous), Sodium Acetate Trihydrate Crystals Sodium Acetate Anhydrous Commercial Pure & IP BP USP ACS AR Analytical Reagent FCC Food grade manufacturers suppliers exporters at:
manufacturer supplier exporter
Aadhunik Industries
Ankleshwar Gujarat & Mumbai, India
TEL: (OFFICE) 91-22-65290104, 91-22-65290105.
e-mail: info@aadhunikindustries.com
Copyright and Usual Disclaimer is Applicable. 10-03-2026
Acetic Acid Glacial ------- Ammonium Bicarbonate ------- Aluminum Chloride ------- Aluminium Potassium Sulphate ------- Ammonium Carbonate ------- Ammonium Carbamate ------- Ammonium Chloride ------- Ammonium Persulfate------- Barium Chloride ------- Benzyl Alcohol ------- Benzoic Acid ------- Boric Acid ------- Borax ------- Calcium Chloride ------- Calcium Oxide ------- Calcium Hydroxide ------- Calcium Lactobionate ------- Calcium D Saccharate ------- Calcium Sulfate ------- Carbamide Peroxide ------- Chromic Chloride -------Copper Cupric Chloride ------- Copper Sulphate ------- Precipitated Coated & Directly Compressible Calcium Carbonate ------- Fumaric Acid ------- Ferric Chloride ------- Formaldehyde Solution ------- Lithium Carbonate ------- Magnesium Chloride ------- Magnesium Sulphate ------- Maleic Acid ------- Malic Acid ------- Manganese Chloride ------- Manganese Sulphate ------- Octyl Dodecanol ------- Oleic Acid ------- Phenyl Ethanol ------- Potassium Bromide ------- Potassium Chloride ------- Potassium Hydroxide Pellets ------- Potassium Monopersulfate ------- Potassium Phosphate Monobasic Dibasic Tribasic ------- Propylene Carbonate ------- Selenious Acid ------- Sodium Acetate ------- Sodium Diacetate ------- Sodium Hydroxide Pellets------- Sodium Thiosulfate ------- Sodium Formaldehyde Bisulfite ------- Sodium Perborate ------- Vanadyl Sulfate ------- Zinc Chloride